PrintFarmer ERP
Tell us you’re interested

Shipping 3D printed parts in India: volumetric weight, box sizes and what the courier will actually bill

Indian couriers bill the higher of actual and volumetric weight (L x B x H in cm / 5,000), so the box sets the price of a light print. Worked example inside.

Short answer

Indian couriers bill a parcel on whichever is higher: its weight on the scale, or its volumetric weight, which is length x breadth x height in centimetres divided by a divisor (5,000 at Delhivery and most couriers, 4,750 for DTDC surface). 3D prints are light and bulky, so the box usually sets the bill: the same 180 g part can be charged as 0.5 kg or as 5 kg depending on what it is packed in. Keep two or three snug standard boxes, measure and photograph every parcel after packing, and price shipping once you know the pincode.

Key takeaways

  • Chargeable weight is the higher of actual and volumetric weight; volumetric weight is L x B x H (cm) / 5,000 at Delhivery and, per Shiprocket, at most couriers, and / 4,750 for DTDC surface.
  • A 180 g print in a 30 x 30 x 25 cm box is billed as 4.5 to 5 kg; in a 14 x 14 x 12 cm box it is billed as 0.5 kg.
  • Bambu Lab’s PLA Basic data sheet gives a heat deflection temperature of 54 to 57 degrees C; closed cars parked in the sun in Arizona have been measured at about 47 degrees C inside and 69 degrees C on the dashboard.
  • Shiprocket gives 7 days to dispute a reweighed parcel (its terms say 7 working days), after which the courier’s weight is accepted, and asks for images showing all three dimensions.
  • India Post Speed Post Parcel costs ₹28 to ₹90 for up to 500 g at retail, plus GST, depending on distance, under the tariff in force from 1 August 2026.

Indian couriers bill a parcel on its chargeable weight: the higher of what it weighs on the scale and its volumetric weight, a weight worked out from the size of the box.1, 5 Most 3D prints are light for their size, so the box decides the bill far more often than the part does. Pack in the smallest box that protects the print, declare the packed weight and the outer dimensions, and keep a photo of every parcel on the scale. The first two keep the courier’s bill close to your own; the photo is the evidence a weight dispute asks for.

How is volumetric weight calculated?

#

Volumetric weight is length x breadth x height of the packed box in centimetres, divided by a number the courier sets, called the divisor. The result is in kilograms.1, 3

The divisor is not the same everywhere:

Courier and service Divisor Source
Delhivery, surface and express 5,000 Delhivery help centre1
DTDC, air express and air cargo 5,000 DTDC support guide3
DTDC, surface 4,750 DTDC support guide3
Shiprocket’s general guidance 5,000 “for most courier companies” Shiprocket blog5

A smaller divisor makes the same box heavier on paper.

More rules sit on top. Couriers set a minimum chargeable weight: Shiprocket’s help page explains it with a 50 g earring set billed as 500 g, and Blue Dart publishes 0.5 kg for Domestic Priority but 10 kg for its surface service, Dart Surfaceline, so a small parcel on the wrong service is billed far above its weight.7, 4 Above the minimum, weight is charged in slabs, commonly 500 g steps, so 0.51 kg is billed as 1 kg.4 And Delhivery’s help page says parcels packed in a flyer (a plastic mailer bag) are charged on dead weight only, up to 1 kg, which suits a sturdy print that does not need a box.1, 2 Check the minimum and the slab size for your courier in your rate calculator; neither is on Shiprocket’s pricing page, and they differ by courier and service.6

Worked example: a 180 g planter in three boxes

#

Assumptions, stated so you can redo the arithmetic with your own numbers:

  • The print is a PLA planter, 10 cm across and 8 cm tall, weighing 180 g, so the smallest box below leaves 2 cm of padding on every side.
  • Freight is an illustrative ₹40 for the first 500 g and ₹35 for each further 500 g. This is not a quote; your rate depends on courier, zone and plan.
  • GST at 18 percent is added to the freight.
Box (cm) Packed weight Volumetric weight at 5,000 Billed slab Freight With 18% GST
30 x 30 x 25 630 g 22,500 / 5,000 = 4.50 kg 4.5 kg (9 slabs) 40 + 8 x 35 = ₹320 ₹377.60
22 x 22 x 18 440 g 8,712 / 5,000 = 1.74 kg 2.0 kg (4 slabs) 40 + 3 x 35 = ₹145 ₹171.10
14 x 14 x 12 320 g 2,352 / 5,000 = 0.47 kg 0.5 kg (1 slab) ₹40 ₹47.20

The part is the same in every row. The large box costs eight times the small one. On a DTDC surface rate the large box gets worse: 22,500 / 4,750 = 4.74 kg, which is the 5 kg slab, or ₹355 before GST and ₹418.90 after.

Note the bottom row: the packed weight is 320 g but the bill is for 500 g, because the volumetric weight is higher and the slab rounds it up. That is normal. What you control is which slab you land in.

Which box sizes should a print shop keep?

#

A few standard sizes make every quote and every declaration repeatable. A reasonable starting set, sized to stay under a slab at both divisors above:

  1. A small box that stays under 2,375 cm³ (for example 14 x 14 x 12 cm = 2,352 cm³), so it bills at 0.5 kg at either divisor. Keychains, figurines, small parts.
  2. A medium box under 4,750 cm³ (for example 20 x 16 x 14 cm = 4,480 cm³), which stays inside 1 kg at either divisor.
  3. A flyer for flat or robust prints that cannot break.

Anything bigger, price individually. Work backwards from the slab: at a 5,000 divisor, 2,500 cm³ is the 0.5 kg ceiling and 5,000 cm³ is the 1 kg ceiling; at 4,750 they fall to 2,375 cm³ and 4,750 cm³. A 20 x 16 x 15 cm box (4,800 cm³) is under 1 kg at 5,000 and just over it at 4,750.

How do you pack 3D prints so they arrive whole?

#

Prints break in predictable places. Pack for those places, not for the part as a whole.

  • Thin features (antennae, swords, fins, text): these snap first. Wrap them separately or support them with a folded card so they are not the thing touching the box wall.
  • Layer lines: FDM parts are weakest between layers.17 Orient the part in the box so a drop does not load a tall, thin section across its layers.
  • Hollow or thin-walled parts (shades, vases): fill the inside with crumpled paper so the wall cannot be pushed in.
  • Sets of small pieces: bag them, label the bag with the order number, and count them before sealing. A missing piece costs a reprint and a second parcel.
  • Space: leave about 2 cm of padding on every side, then stop. More void fill means a bigger box and a higher slab.

Shake the sealed box. If anything moves, it will move harder in transit.

Will PLA deform in a delivery van in summer?

#

It can, and the data sheets show why. Heat deflection temperature (HDT) is the temperature at which a standard test bar bends by a set amount under a set load. It is a lab figure for comparing materials, not a promise about a printed part, but it shows where softening starts.

Material (Bambu Lab data sheet) HDT at 1.8 MPa HDT at 0.45 MPa Glass transition
PLA Basic17 54 °C 57 °C 60 °C
PETG Basic18 65 °C 69 °C 68 °C
ABS19 84 °C 87 °C not given

There is no published measurement for the cargo area of an Indian delivery van. The closest good data is a 2018 study of cars parked in the sun in Tempe, Arizona, with outside air of about 33 to 41 °C during the trials: cabin air averaged about 47 °C over roughly an hour and dashboards reached about 69 °C.20 If afternoons on your parcels’ route reach the mid 30s or higher, treat a closed vehicle as able to approach PLA’s softening range.

From April to June:

  • Print thin or loaded parts (clips, hooks, anything under tension in the box) in PETG or ABS where the customer allows it.
  • Do not pack PLA parts pressed against each other or against the box wall under load.
  • Dispatch early in the week, so a parcel does not sit in a hub over a weekend.
  • Tell customers ordering PLA decor in summer that it should not be left in a car.

How do you avoid weight discrepancy charges?

#

A weight discrepancy is when the courier reweighs or remeasures your parcel, finds it heavier than you declared, and charges the difference. Shiprocket’s support page says the extra is charged to the seller.11

  1. Weigh and measure the parcel after it is sealed, with the outer box dimensions, not the product’s.
  2. Round dimensions up to the next whole centimetre.
  3. Photograph the parcel on the scale, and with a tape against each of the three sides.
  4. Keep those photos against the order number.

If a discrepancy appears on Shiprocket, it shows in the panel’s weight discrepancy tab, with the days left to act on each one (Shiprocket’s knowledge base calls it the weight reconciliation tab, under Billing; the two help pages name it differently).9, 8 Shiprocket’s knowledge base gives 7 days to dispute, after which the courier’s weight is accepted automatically (its terms say 7 working days, so act early).8 The dispute form asks for product images showing the volumetric dimensions, and Shiprocket says tampered or false proof means the courier’s weight is charged.8 The disputed amount is held in your wallet, apart from your usable balance, until it is resolved.8 On Delhivery One, a claim can be raised only after delivery, with the weight in grams, dimensions in centimetres and, optionally, package images.2

Should you quote shipping before or after the address?

#

After, when you can. Freight depends on the destination pincode and the box, and a custom order often has neither fixed at the first message. Three workable approaches:

  • Flat rate: one price for anywhere. Simple, but you lose money on far zones and overcharge near ones.
  • By zone: a local, in-state and rest-of-India price, using your standard boxes.
  • After the address: quote the item “before shipping”, then add freight once the pincode is known, before you ask for the balance. See how to quote a custom order and how to price a print.

Prepaid, cash on delivery and returned parcels

#

Cash on delivery (COD) adds a fee. Shiprocket’s help page describes it as a fixed charge or a percentage of order value, whichever is higher, and its illustration uses ₹36 or 2.5 percent; the real figures vary by courier and show in the rate calculator.10 A parcel that is refused comes back as return to origin (RTO), billed at the courier’s standard charge,11 so you pay freight twice and still hold a part printed with someone else’s name on it. For custom work, take payment first. See taking an advance over UPI.

Aggregator, direct courier or India Post?

#

India Post’s Speed Post Parcel tariff, in force from 1 August 2026, plus GST:13

Weight Local Within state Zone or metro Other states
Up to 500 g (retail) ₹28 ₹76 ₹82 ₹9013
501 to 1,000 g (retail) ₹48 ₹101 ₹137 ₹14313
Up to 500 g (contractual) ₹28 ₹36 ₹40 ₹4713

India Post also lists cash on delivery for online sellers, and free pickup for eligible corporate and bulk customers.13

On 21 November 2026, Shiprocket’s pricing page listed plans at ₹0, 199, 499 and 799 a month with an “average shipment cost” of ₹45, 41, 39 and 36 respectively, without saying what that average covers.6

You ship Fits best Why
A few prepaid parcels a week India Post or an aggregator’s free plan No commitment; compare for your pincodes
COD, or daily dispatch An aggregator Doorstep pickup, COD and several couriers in one panel from the first parcel
Steady high volume A direct courier contract, or a contractual Speed Post account Negotiated rates

Courier services carry GST at 18 percent under the rates in force since 22 September 2025.14 Check whether the rate your panel shows is before or after it.

What can you not send?

#

Shiprocket’s dangerous goods list includes magnetized materials, lithium batteries, flammable adhesives and flammable liquids, and its restricted list includes hazardous chemicals.12 If a product has magnets or a battery inside, ask the courier through your panel before promising delivery, and do not send uncured resin. For a rare high-value business order, a registered seller generally needs an e-way bill when the consignment value exceeds ₹50,000,15 and some states set a higher limit for movement within the state.16 This is general information; confirm with a chartered accountant. Shipping to another state can also decide whether you need GST registration at all; see starting a 3D printing business in India.

Packing-day checklist

#
  1. Print and count every part against the order.
  2. Choose the smallest standard box that gives 2 cm of padding.
  3. Wrap thin features separately; fill hollow parts.
  4. Seal, shake, weigh, measure, photograph.
  5. Book with the packed weight and outer dimensions.
  6. Print the day’s labels together and hand over in one pickup.
  7. Send the customer the tracking link.

After dispatch: “where is my order?”

#

Send the tracking number the moment the parcel is booked, not when the customer asks. A customer who already has the link has less reason to message. If you sell through chats, keeping the order and the conversation together makes the answer one look rather than a search.

Where PrintFarmer fits

#

PrintFarmer plans an order’s boxes, each with a size and weight, and can ask Shiprocket for a live rate before anything is packed, so freight can go into the quote. The box sizes you keep are saved as presets. Through your own Shiprocket account it books the parcel, schedules pickup, syncs tracking and cancels, and it prints the day’s labels together. Each parcel keeps the address and the size and weight you declared as they were when it was created, so you have that record to set beside your photos if the courier disputes the weight. The dispute itself is still raised in Shiprocket. Shiprocket is its only carrier connection: there is no direct India Post or single-courier integration. Tell us you’re interested. It is not launched yet.

Frequently asked questions

How is volumetric weight calculated by Indian couriers?

Multiply the box’s length, breadth and height in centimetres and divide by the courier’s divisor. Delhivery uses 5,000 for surface and express, DTDC uses 5,000 for air and 4,750 for surface, and the courier bills whichever is higher, that figure or the actual weight.

Why did my courier charge for 2 kg when my parcel weighs 300 grams?

Because the box was large. A 22 x 22 x 18 cm box has a volumetric weight of 1.74 kg at a 5,000 divisor, which rounds up to the 2 kg slab, regardless of the 300 g on the scale.

Will PLA prints deform in a courier van in an Indian summer?

They can. Bambu Lab’s PLA Basic data sheet gives a heat deflection temperature of 54 to 57 degrees C, and cars parked in the sun in Arizona, on days of about 33 to 41 degrees C, were measured at about 47 degrees C cabin air and 69 degrees C on the dashboard. Thin or loaded PLA parts are at risk; PETG and ABS have more margin.

What does it cost to courier a 500 gram parcel within India?

India Post’s Speed Post Parcel retail tariff for up to 500 g, in force from 1 August 2026, is ₹28 local, ₹76 within the state, ₹82 zone or metro and ₹90 to other states, plus GST. Aggregator rates depend on plan, courier and zone; on 21 November 2026 Shiprocket’s pricing page listed an average shipment cost of ₹36 to ₹45 by plan without saying what the average covers.

How do I avoid weight discrepancy charges on Shiprocket?

Enter the packed weight and the outer box dimensions, not the product’s, and photograph every parcel on a scale with a tape against each side. If a discrepancy appears, dispute it from the weight discrepancy section of your panel within the 7 days Shiprocket allows (its terms say 7 working days), with those photos.

Is India Post Speed Post or a courier aggregator cheaper for a small seller?

For a few prepaid parcels a week, Speed Post’s published retail rates are competitive and need no account. India Post also offers cash on delivery for online sellers and free pickup for eligible bulk customers. An aggregator gives pickup from your door and one panel for several couriers from the first parcel, which matters more as volume grows. Compare both for your own pincodes.

Sources

All sources accessed .

  1. Volumetric weight calculation (Delhivery help centre) help.delhivery.com.
  2. Weight mismatch (Delhivery help centre) help.delhivery.com.
  3. Support service guide: volumetric weight (DTDC) dtdc.com.
  4. Price finder: minimum chargeable weight (Blue Dart) bluedart.com.
  5. Volumetric weight (Shiprocket) shiprocket.in.
  6. Pricing plans (Shiprocket) shiprocket.in.
  7. What is minimum weight? (Shiprocket support) support.shiprocket.in.
  8. What is the weight dispute manager? (Shiprocket knowledge base) shiprocket.in.
  9. Please explain the weight discrepancy tab (Shiprocket support) support.shiprocket.in.
  10. How to check the applied COD charges (Shiprocket support) support.shiprocket.in.
  11. Why are there additional charges for weight and RTO on my account? (Shiprocket support) support.shiprocket.in.
  12. Which products are prohibited or dangerous to ship via Shiprocket (Shiprocket support) support.shiprocket.in.
  13. Speed Post Parcel (Domestic) tariff (India Post) indiapost.gov.in.
  14. CGST rate on postal and courier services, heading 9968 (GSTGyaan, reproducing Notification 11/2017-CTR as amended by 15/2025-CTR) gstgyaan.com.
  15. CGST Rules, rule 138: e-way bill (CBIC) cbic-gst.gov.in.
  16. State-wise e-way bill limits (Cashfree) cashfree.com.
  17. Bambu PLA Basic technical data sheet (Bambu Lab) cdn.shopify.com.
  18. Bambu PETG Basic technical data sheet (Bambu Lab) cdn.shopify.com.
  19. Bambu ABS technical data sheet (Bambu Lab) cdn.shopify.com.
  20. Vanos et al. (2018), Evaluating the impact of solar radiation on pediatric heat balance within enclosed, hot vehicles, Temperature 5(3) pmc.ncbi.nlm.nih.gov.

Run one real order through it

PrintFarmer is an ERP for 3D print shops. The enquiry, the quote, the plates, the parcel, the invoice and the payment sit on one record, so the answer is on the screen and not in a chat thread.