GST and HSN/SAC codes for 3D printing in India: printed goods, printing services and job work
No GST code names 3D printing. Printed plastic parts are usually HSN 3926 at 18%, printing services SAC 9988 or 9989 at 18%, and non-electronic toys 9503 at 5%.
Short answer
No Indian GST notification, circular or advance ruling names 3D printing, so you classify by what you actually supply. A printed article you sell is goods, classified by what the article is: most plastic parts fall under HSN 3926 at 18 percent, non-electronic toys under 9503 at 5 percent. Printing a customer’s file as a service sits in SAC heading 9989 (998920, plastic manufacturing to the customer’s specification) or, when the customer supplies the material, heading 9988 (job work), both at 18 percent as of November 2026.
Key takeaways
- There is no ‘3D printing’ code. Classify the article if you sell goods, and the service if you sell printing.
- Most printed plastic articles are HSN 3926 at 18 percent; non-electronic toys of heading 9503 are 5 percent, confirmed for all toys by Circular 265/11/2026-GST.
- Printing on material the customer owns is heading 9988 at 18 percent; printing a customer’s design on your own material, billed as a service, points to 998920 under heading 9989, also 18 percent.
- Up to ₹5 crore turnover, a tax invoice needs a 4-digit HSN, and may omit it on invoices to unregistered buyers (Notification 78/2020-Central Tax).
- An unregistered business cannot collect GST in any form (section 32 of the CGST Act).
There is no HSN or SAC code for “3D printing” in India, and no notification, circular or advance ruling that names it. You classify what you actually supply. If you sell a printed article, it is goods, coded by what the article is: most plastic parts are HSN 3926 at 18 percent, and non-electronic toys are 9503 at 5 percent.3 If you sell printing as a service, the closest entries are SAC 998920 under heading 9989 (your material) or heading 9988 (the customer’s material), both at 18 percent.9, 7, 8
This is general information, checked against the notifications listed under Sources on 21 November 2026. Rates change by notification, so confirm your classification with a chartered accountant before you invoice.
Codes and rates by what you supply
#| What you supply | Likely code | GST rate | How sure anyone can be |
|---|---|---|---|
| A plastic article you sell (bracket, stand, enclosure, organiser) | HSN 3926, other articles of plastics | 18%3 | Reasonably: 3926 is the catch-all heading for plastic articles |
| Tableware, kitchenware or other household articles of plastics | HSN 3924 | 18%3 | Reasonably, if the item really is a household article |
| A toy, doll, scale model or puzzle, non-electronic | HSN 9503 | 5%3 | Firm, since Circular 265/11/2026-GST2 |
| The same toy with electronics in it | HSN 9503 | 18%3 | Firm |
| Festive or carnival articles | HSN 9505 | 18%3 | Depends on the item; ask |
| Imitation jewellery (earrings, pendants) | HSN 7117 | 3%3 | Ask your CA to confirm a plastic piece qualifies |
| Printing a customer’s file on your own filament, billed as a service | SAC 998920, heading 99899 | 18%8 | Reasoned by analogy; no ruling names 3D printing |
| Printing on filament or resin the customer supplies | Heading 9988, for example SAC 9988529 | 18%7 | Reasonably |
| Design or CAD work billed on its own | SAC 998391, specialty design services9 | 18% | Reasonably |
Goods rates are from Notification 9/2025-Central Tax (Rate), effective 22 September 2025.3 Its two amendments in 2026 changed beverages (01/2026, from 1 May 2026) and retreaded tractor tyres and bio-stimulants (02/2026, from 1 November 2026), not these headings.4, 5 The services amendment of the same date (06/2026) left headings 9988 and 9989 alone.6
Why is there no single “3D printing” code?
#HSN (Harmonised System of Nomenclature) codes classify goods by what they are, not how they were made. SAC (Services Accounting Code) codes classify services. 3D printing is a process, so the code depends on whether you sold an object or a service, and on who owned the material.
We searched the GST Council’s advance ruling database for “3D”, “3-D” and “additive” on 21 November 2026 and found no ruling on 3D printing.12 The nearest is a Rajasthan ruling (RAJ/AAR/2025-26/12, 7 October 2025) that a UV-printed acrylic photo frame is printed matter under 4911 99 90, not a plastic article under 3926.11 It binds only that applicant, but it shows how far “what the article is” can move a code.
Pages that rank for this question each give one code, and disagree: on 21 November 2026 one gave 998898 and another 998920, and neither asked who owns the material. Code 998898 sits under heading 9988, which the explanatory notes limit to inputs “owned by units other than the units providing the service”.10 If the filament is yours, it is the wrong heading. The official annexure and the explanatory notes also number some codes differently (998898 and 998899, 998920 and 998921);9, 10 the annexure is the one attached to the rate notification, so this article uses its numbers.
Selling your own designs: classify the article
#When you design something, print it on your filament and sell it from stock, you are selling goods. The process is irrelevant: a printed phone stand is classified the way a moulded one would be. Start from the most specific heading that describes it:
- Is it a toy, game, scale model or puzzle? Heading 9503 (5% or 18%) or 9504.3
- Is it a household or kitchen article of plastic? Heading 3924.
- Is it jewellery with no precious metal? Heading 7117.
- Is it mainly a printed image, like the acrylic frame above? Possibly chapter 49.
- Otherwise, 3926.
Two traps. Heading 8306 covers statuettes and ornaments of base metal only, so a PLA figurine is not 8306.3 And 3926 itself has exceptions at lower rates: plastic beads and feeding bottles are 5%, plastic bangles are nil.3
Printing a customer’s file with your material: goods or service?
#It depends, and the reasoning comes from paper printing. CBIC Circular 11/11/2017-GST (20 October 2017) says that when a customer supplies only the content and the printer supplies the paper:
- for books, brochures and annual reports, the printing is the principal supply, so it is a service under heading 9989;1
- for printed envelopes, boxes and other goods of chapters 48 and 49, the goods are the principal supply, so it is a sale of goods.1
The circular is about paper. Applying it to 3D printing is reasoning by analogy, not law. By that analogy, a recognisable finished product printed from a customer’s file (a figurine, a nameplate) looks like goods, while a bespoke part made to a customer’s drawing looks closer to a service. The explanatory note for 998920 describes exactly that: plastic parts made “for third parties in accordance with their specifications”, typically “not identifiable” in the goods tariff by their future use.10
For most plastic work the rate is 18% either way. The choice matters more for registration, composition and place of supply, covered below.
Printing on material the customer supplies: is that job work?
#If the customer hands you their own spool or resin, you are performing a process on someone else’s goods. Heading 9988 covers this. After Notification 15/2025-Central Tax (Rate), serial 26:
- Job work (defined in section 2(68) as work on goods “belonging to another registered person”) not in the listed categories is item (iv), 9% CGST, so 18% in all.17, 7
- The same work for an unregistered customer is item (vii), “treatment or process on goods belonging to another person”, also 18%.7
The 5% job-work entries cover a fixed list: food, pharmaceuticals, hides and leather, textiles, bricks, jewellery, handicraft goods, umbrellas, and printing of newspapers, books and low-rate chapter 48 or 49 goods. Plastic parts are not on it.7
Design and CAD work billed separately
#Modelling, scanning cleanup or design for a customer is a service. SAC 998391 (specialty design services, including industrial design) fits, at 18%.9 If the design fee is only part of delivering the printed part, it may instead be part of a composite supply, taxed at the part’s rate (see the worked example).
What changed on 22 September 2025?
#Notification 9/2025-Central Tax (Rate) replaced the 2017 goods schedule,3 and Notification 15/2025-Central Tax (Rate) rewrote the job-work entry, moving residual job work to 18%.7 Toys went to 5% (18% if electronic), but the entries say “toys like tricycles, scooters, pedal cars etc.”, and some tax offices read them narrowly.3, 2 Circular 265/11/2026-GST (28 October 2026) settled it: they cover all of heading 9503, including dolls, scale models and puzzles.2
How many HSN digits does the invoice need?
#Rule 46 of the CGST Rules requires the HSN or SAC on a tax invoice.16 Notification 78/2020-Central Tax sets the digits from 1 April 2021:13
| Turnover in the previous financial year | Minimum digits | Invoices to unregistered buyers |
|---|---|---|
| Up to ₹5 crore | 413 | May be omitted13 |
| Above ₹5 crore | 613 | Required |
The return is separate. From the May 2025 return period, GSTR-1 Table 12 takes HSN from a drop-down, split into B2B and B2C tables.14, 15 GSTN posted on X in June 2025 that the B2C table “is not mandatory”, which is a portal note rather than a notification, so keep codes on your records anyway.15
CGST and SGST, or IGST?
#Same state as your place of supply: CGST plus SGST, half each. Different state: IGST at the full rate.
- Goods to a registered buyer: where the movement ends for delivery (section 10(1)(a), IGST Act).24
- Goods to an unregistered buyer: the buyer’s address recorded on the invoice, and your own location if none is recorded (section 10(1)(ca), in force since 1 October 2023).24, 25 The state name alone counts as the address.24 Where billing and delivery addresses differ, Circular 209/03/2024-GST says the delivery address on the invoice decides.25
- Services: a registered customer’s location; for an unregistered customer, their address on record, or else your location (section 12(2)).26
Worked example: a part, a design fee and courier on one invoice
#Assumptions: you are registered in Karnataka and so is your customer. The order is a printed part (₹1,200), a design fee (₹600) and courier (₹100), all before tax.
Courier arranged by you to deliver your goods is part of a composite supply (section 2(30) uses goods “packed and transported with insurance” as its illustration), so it takes the rate of the goods.17, 18
Case A, the part is a 3926 article at 18%. Taxable value ₹1,900. Tax at 18% is ₹342: CGST ₹171, SGST ₹171. Total ₹2,242. Whether the design fee is separate or composite makes no difference, because everything is 18%.
Case B, the part is a non-electronic toy at 5%.
| Treatment | Taxable at 5% | Taxable at 18% | Tax | Invoice total |
|---|---|---|---|---|
| Design fee is a separate supply | ₹1,300 (toy and courier): ₹65 | ₹600: ₹108 | ₹173 | ₹2,073 |
| Design is part of supplying the toy | ₹1,900: ₹95 | nil | ₹95 | ₹1,995 |
The ₹78 gap is why a mixed order is worth a conversation with your CA. A mixed supply sold for a single price is taxed at the highest rate in it (section 8),18 so a bundle can also go the other way.
If you quote B2C prices inclusive of 18%, the tax inside ₹1,500 is ₹1,500 minus ₹1,500 / 1.18, which is ₹228.81, on a taxable value of ₹1,271.19. The pricing side is in how to price a 3D print in India.
If you are not registered
#Section 32 of the CGST Act says an unregistered person “shall not collect” any amount by way of tax.23 Your bill shows a price, with no GST line, no rate and no GSTIN.
Registration becomes compulsory above ₹20 lakh turnover (₹10 lakh in special category states).20 For goods-only suppliers, Notification 10/2019-Central Tax raises that to ₹40 lakh, except in the states it lists, including Telangana and most of the north-east; billing design as a service ends goods-only status.27 Section 24 also requires registration for any inter-State taxable supply.21 Services suppliers are exempt from that up to the same threshold (Notification 10/2017-Integrated Tax); goods suppliers are not.30 Goods sellers on a marketplace that collects TCS can stay unregistered if under the threshold and selling within one state, with an enrolment number (Notification 34/2023-Central Tax).29 Starting a 3D printing business in India covers registration in more detail.
The composition scheme for goods (section 10(1)) allows turnover up to ₹1.5 crore, or ₹75 lakh in eight north-eastern and hill states (Notification 14/2019-Central Tax).19, 28 Any inter-State outward supply rules it out.19 Selling goods through a TCS-collecting marketplace has been allowed since 1 October 2023; services through one are still barred.19 Services above 10 percent of turnover or ₹5 lakh, whichever is higher, also rule it out, leaving the services scheme in section 10(2A), capped at ₹50 lakh.19 A composition supplier issues a bill of supply (section 31(3)(c)) and cannot collect tax from the customer (section 10(4)).22, 19 If you ship to customers in other states from Instagram or WhatsApp orders, composition is closed to you.
What to take to your CA
#Bring these, and ask for the answers in writing:
- What you sell, with photos, split into stock products, custom prints on your material, prints on customer material, and design work, with the code you use for each.
- Last financial year’s turnover, how much went to other states, and which marketplaces you sell through.
- Whether you bill courier and design fees separately or in one price.
- A sample invoice, quote and advance receipt (see quoting custom orders and taking an advance over UPI).
Ask: goods or service for my custom prints? Which 8-digit tariff items? Is any product a toy at 5%? Do I need to register, and is composition worth it?
Where PrintFarmer fits
#PrintFarmer keeps the parties side of an invoice: customer and supplier tax registrations, bill-to, ship-to and your registered place of business, printed on each document and frozen when it is issued. It does not yet calculate GST from a rate per line, does not print HSN or SAC on invoice lines, and does no e-invoicing, e-way bills or return filing; tax today is an amount you enter per charge. A registered shop will still need its accounting or billing software for a compliant tax invoice. Tell us you’re interested. It is not launched yet.
How the rates were checked
#Every rate and rule above comes from the sources listed with this article, last checked on 21 November 2026. Goods rates come from West Bengal’s consolidated chart of Notification 9/2025-Central Tax (Rate), amended to 31 March 2026, checked against both later amendments.3, 4, 5 If a notification has changed since, the notification wins.
Frequently asked questions
What is the HSN or SAC code for 3D printing services in India?
None is named for 3D printing. Printing a customer’s design on your own material, billed as a service, best fits SAC 998920 (moulding, pressing, stamping, extruding and similar plastic manufacturing services) under heading 9989. Printing on material the customer supplies fits heading 9988, for example 998852 (plastic product manufacturing services). Both are 18 percent.
What is the GST rate on 3D printing services?
18 percent (9 percent CGST plus 9 percent SGST, or 18 percent IGST) under both heading 9988 and heading 9989 after the changes of 22 September 2025. The lower 5 percent job-work entries cover listed goods such as textiles, food and printing of books, not plastic parts.
What HSN code do I use for 3D printed plastic parts I sell?
Classify the article, not the process. A bracket, enclosure or stand is usually 3926 (other articles of plastics, 18 percent), a household article 3924 (18 percent), a toy 9503 (5 percent if non-electronic). Your CA should confirm the 8-digit tariff item.
Is GST on 3D printed toys 5 percent or 18 percent?
5 percent for non-electronic toys and 18 percent for electronic toys. Circular 265/11/2026-GST of 28 October 2026 clarified that these entries cover all toys of heading 9503, including dolls, scale models and puzzles, not just tricycles and pedal cars.
Do I have to print the HSN code on every invoice if my turnover is under ₹5 crore?
On invoices to registered buyers, yes, at least 4 digits. On invoices to unregistered buyers you may leave it out, under the proviso in Notification 78/2020-Central Tax. Your GSTR-1 still needs an HSN summary in Table 12.
Can an unregistered 3D printing business charge GST?
No. Section 32 of the CGST Act says a person who is not registered shall not collect any amount by way of tax. Your bill shows a price, with no GST line and no GSTIN.
Sources
All sources accessed .
- CBIC Circular No. 11/11/2017-GST, clarification on taxability of printing contracts (GST Council) gstcouncil.gov.in.
- CBIC Circular No. 265/11/2026-GST, 28 October 2026 (copy hosted by CAalley) caalley.com.
- Consolidated GST rate chart of goods w.e.f. 22.09.2025, amended up to 31.03.2026 (West Bengal Commercial Taxes, based on Notification 9/2025-Central Tax (Rate)) comtax.wb.gov.in.
- Notification No. 01/2026-Central Tax (Rate), 30 April 2026 (copy hosted by taxo.online) taxo.online.
- Notification No. 02/2026-Central Tax (Rate), 27 October 2026 (copy hosted by CAalley) caalley.com.
- Notification No. 06/2026-Central Tax (Rate), 27 October 2026, amending services rates (copy hosted by CAalley) caalley.com.
- Notification No. 15/2025-Central Tax (Rate), 17 September 2025, amending services rates (copy hosted by BCAS) bcasonline.org.
- Notification 11/2017-Central Tax (Rate), serial 27, heading 9989, as amended (GSTGyaan) gstgyaan.com.
- Scheme of classification of services, annexure to Notification 11/2017-Central Tax (Rate) (GST Council) gstcouncil.gov.in.
- Explanatory notes to the scheme of classification of services (GST Council) gstcouncil.gov.in.
- Advance ruling RAJ/AAR/2025-26/12, Maxgrade Private Limited, 7 October 2025 (GST Council) gstcouncil.gov.in.
- Authority for Advance Ruling database (GST Council) gstcouncil.gov.in.
- Notification No. 78/2020-Central Tax, HSN digits on tax invoices (GST Council) gstcouncil.gov.in.
- GSTN advisory, reporting of HSN codes in Table 12 and Table 13 of GSTR-1/1A, 1 May 2025 (copy on MahaGST) mahagst.gov.in.
- GSTN clarification on Table 12B for B2C supplies, June 2025 (CAclubindia) caclubindia.com.
- CGST Rules, rule 46: Tax invoice (CBIC) taxinformation.cbic.gov.in.
- CGST Act, section 2: definitions of job work, composite supply and mixed supply (CBIC) taxinformation.cbic.gov.in.
- CGST Act, section 8: composite and mixed supplies (CBIC) taxinformation.cbic.gov.in.
- CGST Act, section 10: composition levy, as amended by the Finance Act 2023 (CBIC) taxinformation.cbic.gov.in.
- CGST Act, section 22: persons liable for registration (CBIC) taxinformation.cbic.gov.in.
- CGST Act, section 24: compulsory registration (CBIC) taxinformation.cbic.gov.in.
- CGST Act, section 31: tax invoice and bill of supply (CBIC) taxinformation.cbic.gov.in.
- CGST Act, section 32: prohibition of unauthorised collection of tax (CBIC) taxinformation.cbic.gov.in.
- IGST Act, section 10: place of supply of goods (CBIC) taxinformation.cbic.gov.in.
- CBIC Circular No. 209/3/2024-GST, 26 June 2024, place of supply of goods to unregistered persons (GST Council) gstcouncil.gov.in.
- IGST Act, section 12: place of supply of services (CBIC) taxinformation.cbic.gov.in.
- Notification No. 10/2019-Central Tax, ₹40 lakh threshold for suppliers of goods (GST Council) gstcouncil.gov.in.
- Notification No. 14/2019-Central Tax, composition limit (GST Council) gstcouncil.gov.in.
- Notification No. 34/2023-Central Tax, unregistered suppliers of goods through e-commerce operators (GST Council) gstcouncil.gov.in.
- Notification No. 10/2017-Integrated Tax, inter-State suppliers of services exempt from registration (GSTGyaan) gstgyaan.com.