---
title: "How to quote a custom 3D printing order: what to ask, what to write down, and how long the price holds"
description: A custom 3D print quote needs scope, file revision, material, price, validity date, advance, lead time and exclusions. The questions to ask, and a template.
updated: 2026-11-21
canonical: https://printfarmerp.com/blog/quote-custom-3d-print-orders/
---

# How to quote a custom 3D printing order: what to ask, what to write down, and how long the price holds

By the PrintFarmer team. Published 21 November 2026. Updated 21 November 2026.
https://printfarmerp.com/blog/quote-custom-3d-print-orders/

## Short answer

A quote for a custom 3D print should fix eight things in writing: what is being made (and from which file revision), quantity, material and colour, finish, price with what it excludes, a validity date, the advance, and a lead time that starts when the advance arrives. Ask the intake questions before you price, record the price even if the customer goes quiet, and treat any change to file, quantity or material as a new quote. In India, GST law prescribes the contents of a tax invoice, not of a quotation or proforma, and neither of those creates a tax liability.

## Key takeaways

- Ask use, quantity, material, colour, tolerance, finish, deadline and delivery pincode before you put a number on anything.
- Give the quote a validity date and make the lead time start from the day the advance is received, not from the day you sent the quote.
- There is no legally prescribed validity period for a quotation in India; small-business billing guides put common practice between 7 and 30 days, most often 15 to 30.
- Rule 46 of the CGST Rules lists what a tax invoice must contain; quotations and proformas have no prescribed format and create no GST liability by themselves.
- Typical FDM service tolerances are around plus or minus 0.5 mm, so state the tolerance you will hold rather than leaving it implied.

A quote for a custom 3D print needs eight lines: what is being made and from which file revision, the quantity, the material and colour, the finish, the price and what it leaves out, the date the price stops holding, the advance you need before you start, and a lead time that counts from the day that advance arrives. Ask your intake questions before you price, write the price down even if nothing comes of it, and treat any change to the file, the quantity or the material as a new quote.

Many of the guides that rank for this question are written for people buying from a service bureau with an upload-and-price website. They explain what moves the price, but skip the part a small shop actually struggles with: the request arrives as a photo in a chat, the scope changes three times, and the customer goes quiet after you send a number. This guide is about that.

## What should a custom 3D print quote include?

Eight lines, each one closing an argument that would otherwise happen later.

1. **Scope and file revision.** "Nameplate, design v3 sent on 20 Nov." If the file changes, the quote does not cover it.
2. **Quantity.** Per-piece and total.
3. **Material and colour.** "PLA, matte black." Not "plastic".
4. **Finish.** As printed, supports removed, sanded, painted.
5. **Price, and what it excludes.** Usually shipping.
6. **Validity.** A date, not "valid for some days".
7. **Advance.** An amount in rupees, not only a percentage.
8. **Lead time.** Working days from receipt of the advance.

How you arrive at the price itself is a separate job; [How to price a 3D print in India](https://printfarmerp.com/blog/price-3d-prints-india/) covers the formula, and [Failed prints, purge and supports](https://printfarmerp.com/blog/failed-prints-reprint-cost/) covers the filament and hours that never ship.

## What should I ask a customer before quoting a 3D print?

Each of these changes the price or the risk.

| Question | Why it matters |
|---|---|
| What is it for? | A display piece and a bracket that takes load need different material and infill. |
| How many, and will there be repeats? | Plate packing and per-piece price depend on it. |
| Which material, or what conditions will it face? | Heat, sunlight and outdoor use rule out PLA for many parts. |
| What colour, and how exact? | "Black" is easy. "Match my logo" needs a sample. |
| Does it have to fit something? | If yes, you need dimensions and a tolerance. |
| What finish? | Sanding and painting are labour, and can take longer than the print. |
| When do you need it in hand? | A hard date may mean bumping other work. |
| Delivery pincode? | Without it you cannot price shipping. |

On tolerance: an FDM printer will not hold machined dimensions, and saying so in advance is cheaper than a reprint. Protolabs Network's published standard for prototyping FDM is plus or minus 0.5 percent with a lower limit of plus or minus 0.5 mm.[[10]](https://www.hubs.com/manufacturing-standards/) Fictiv states plus or minus 0.5 mm (or 1 percent per inch) for FDM, and a clearance of 0.2 mm between mating parts to ensure fit.[[11]](https://www.fictiv.com/capabilities/3d-printing-services/fused-deposition-modeling) Those are service-bureau figures; measure what your own printers hold before you promise a number.

## Why record the price when it is only an enquiry?

An enquiry is not an order, but it is still a price you offered to a named person on a date. Write it down for three reasons.

- **The customer comes back.** Often weeks later, with "you said ₹180". You want to know whether you did, and for what.
- **You learn your conversion.** Ten quotes and two orders tells you something about your price or your speed of reply.
- **A dropped enquiry is not a cancellation.** If you only record orders, a lead that went quiet either vanishes or gets counted as a cancelled sale. Neither is true. Keep them in separate piles.

## A quote template for custom 3D printing

Here is a worked example. Assumptions: an unregistered seller (no GST), 25 personalised desk nameplates in PLA, the customer's design file revision 3, delivery pincode not yet given. The per-piece price of ₹180 is illustrative; use your own costing.

| Field | Entry |
|---|---|
| Quote number | Q-2026-041 |
| Date issued | 21 Nov 2026 |
| Scope | Desk nameplate, 25 names, from design v3 (sent 20 Nov). Names as listed in the attached sheet. |
| Quantity | 25 |
| Material and colour | PLA, matte white base, black text |
| Finish | As printed, supports removed, no sanding or paint |
| Price | 25 × ₹180 = ₹4,500, plus one-time setup ₹300 = **₹4,800, before shipping** |
| Validity | Price holds until 5 Dec 2026 |
| Advance | 50 percent, ₹2,400, by UPI |
| Lead time | 7 working days from receipt of the advance |
| Tolerance | Plus or minus 0.5 mm on overall size; not for press-fit use |
| Excluded | Shipping (priced once the address is known), design changes after v3 |

Check the arithmetic: 25 × 180 = 4,500; 4,500 + 300 = 4,800; half of 4,800 is 2,400. The validity is 14 days after 21 November, which is 5 December.

When the customer gives a pincode and the parcel is priced at, say, ₹95, the total becomes ₹4,895 and the balance due before dispatch is ₹4,895 − ₹2,400 = ₹2,495.

## Should a 3D printing quote include shipping?

Include it when you know the destination and the box. If you do not, write "total, before shipping" in the price line, so the customer cannot read ₹4,800 as the final number. Then price the parcel once the address is in and add it before you ask for the balance. A light but bulky print can cost more to send than its weight suggests; [Shipping 3D printed parts in India](https://printfarmerp.com/blog/shipping-3d-prints-india/) goes through the box sizes and what gets billed.

## How long should a quote stay valid, and why does the lead time need a date too?

There is no legally prescribed validity period for a quotation in India; the seller sets it.[[5]](https://tallysolutions.com/business-guides/how-to-write-quotation/) Small-business guides from Tally and Vyapar put common practice at 15 to 30 days and 7 to 30 days respectively.[[5]](https://tallysolutions.com/business-guides/how-to-write-quotation/)[[6]](https://vyaparapp.in/quotation-formats) For custom prints, 14 days is a reasonable default: long enough for a customer to decide, short enough that a filament price change or a full month on your printers does not catch you holding an old promise.

Validity and lead time answer different questions. Validity says how long the price holds. Lead time says how long the work takes once it starts. If the lead time counted from the quote date, the example quote sent on 21 November would promise the nameplates by 1 December. A customer who pays on 4 December, still inside the validity, would then be owed parts you have not started. Count it from the day the advance lands.

## When should I ask for an advance, and what does it reserve?

Ask for it before you load anything that is personalised, because a nameplate with someone's name on it has no second buyer. The advance reserves printer time and material from the day it arrives, and the quote should say so in those words.

There is no standard percentage. Published terms run from full prepayment (IIT BHU's direct manufacturing service asks for a receipt of 100 percent advance payment before it confirms a delivery date) to part advances with the balance before dispatch.[[9]](https://www.iitbhu.ac.in/cf/peh/direct_manufacturing) Half up front is a common middle for custom work: it covers material and a failed plate or two without asking a first-time customer to trust you with the whole amount. For personalised items that have no second buyer, [taking an advance over UPI](https://printfarmerp.com/blog/upi-advance-custom-orders/) recommends taking the full price before printing; the template above uses half to show the arithmetic.

If you are GST-registered, section 31(3)(d) of the CGST Act requires a receipt voucher when you receive an advance, with particulars set out in rule 50.[[2]](https://taxinformation.cbic.gov.in/content/html/tax_repository/gst/acts/2017_CGST_act/active/chapter7/section31_v1.00.html)[[3]](https://taxinformation.cbic.gov.in/content/html/tax_repository/gst/rules/cgst_rules/active/chapter6/rule50_v1.00.html) Whether tax is due on the advance itself depends on what you supply: Notification 66/2017-Central Tax defers tax on an advance for goods to the invoice (unless you are on the composition scheme), while an advance for services is taxed on receipt.[[8]](https://gstcouncil.gov.in/node/3993) [Taking an advance for a custom order over UPI](https://printfarmerp.com/blog/upi-advance-custom-orders/) covers recording it and what happens to the money if the order is cancelled.

## Estimate, quote, proforma, invoice: what is the difference?

| Document | What it says | Creates a debt? | GST position (India) |
|---|---|---|---|
| Estimate | An approximate price that may move once scope is clear[[7]](https://blog.petpooja.com/glossary/quotation/) | No | No prescribed format |
| Quotation | A firm offer at this price until a date[[7]](https://blog.petpooja.com/glossary/quotation/) | No | No prescribed format |
| Proforma invoice | "Please pay this before we supply", usually after the customer accepts[[7]](https://blog.petpooja.com/glossary/quotation/) | No | Not a tax invoice; creates no GST liability and no input tax credit[[4]](https://busy.in/gst/proforma-invoice-under-gst-what-it-is-and-how-it-works/) |
| Receipt voucher | "We received this advance" | No, it records money in | Required for registered persons under section 31(3)(d)[[2]](https://taxinformation.cbic.gov.in/content/html/tax_repository/gst/acts/2017_CGST_act/active/chapter7/section31_v1.00.html) |
| Tax invoice | "You owe this for what we supplied" | Yes | Contents set by rule 46 of the CGST Rules[[1]](https://taxinformation.cbic.gov.in/content/html/tax_repository/gst/rules/cgst_rules/active/chapter6/rule46_v1.00.html) |

The GST law prescribes what goes on a tax invoice, and separately on bills of supply, receipt, refund and payment vouchers, and credit and debit notes.[[2]](https://taxinformation.cbic.gov.in/content/html/tax_repository/gst/acts/2017_CGST_act/active/chapter7/section31_v1.00.html) Rule 46 lists the tax invoice's particulars, including the supplier's GSTIN, a consecutive serial number of up to 16 characters unique for the financial year, the HSN or SAC code, the taxable value, the rate and amount of tax, place of supply for inter-state supplies, whether reverse charge applies, and a signature or digital signature.[[1]](https://taxinformation.cbic.gov.in/content/html/tax_repository/gst/rules/cgst_rules/active/chapter6/rule46_v1.00.html) Quotations and proformas are not on that list, so their format is yours to choose. Some billing-software guides say GST "must" be shown on a quote;[[5]](https://tallysolutions.com/business-guides/how-to-write-quotation/) the rules do not say that. If you are registered, showing the rate and whether it is extra still saves an argument.

This is general information, not tax advice; confirm your own position with a chartered accountant. For which code applies to printed parts, see [GST and HSN/SAC codes for 3D printing](https://printfarmerp.com/blog/gst-hsn-3d-printing-india/).

## How do I follow up without chasing?

Send one message, two or three days before the validity date: "The price for the 25 nameplates holds until Saturday 5 December. After that I will need to re-quote. The 7 working days start when the advance arrives." Then stop.

When the date passes, mark the enquiry as lost and release anything you had pencilled in. Do not hold printer time for a quote that has no advance against it. If they come back later, they get a fresh quote at current prices. [Selling 3D prints on Instagram and WhatsApp](https://printfarmerp.com/blog/sell-3d-prints-instagram-whatsapp/) covers keeping these threads from getting lost in the first place.

## What counts as a new quote?

Anything that changes the cost or the risk:

- a new file revision (v3 to v4),
- a change in quantity,
- a change of material, colour or finish,
- a shorter deadline.

Issue a new quote number rather than editing the old one, so both sides can see what was agreed when. Continuing the example: if the customer moves from 25 to 40 nameplates and you price the larger run at ₹170 each, the new quote is 40 × ₹170 = ₹6,800, plus ₹300 setup, ₹7,100 before shipping. A 50 percent advance is ₹3,550; with ₹2,400 already paid, ₹1,150 more is due before you start.

## Which terms deserve one line each?

- **File ownership.** Say who keeps the design file and whether you may reuse or show it. If you modelled it, say whether the customer gets the source file. Anything commercially valuable deserves a written agreement, not a quote line.
- **Tolerance.** The figure you will hold, and "not for press-fit use" unless you have tested the fit.
- **Colour variation.** "Colour may vary slightly between spools and from on-screen images."
- **Cancellation.** What the advance covers if the customer cancels after printing has started.

## Where PrintFarmer fits

PrintFarmer's order intake asks whether you are taking an enquiry or an order. An enquiry is saved as a lead with the price you offered, and a lead that is dropped never appears in the cancellations report. A lead can be sent as an estimate link that the customer opens without an account. They see the price; if the lead has no customer yet they give their name and phone, and if it ships they give the delivery address, with the pincode filling in city and state. The link works for 30 days by default and can say "Total, before shipping". Answering does not confirm the order; you price the parcel and confirm it yourself.

Quotes and proformas are frozen when issued, each with its own number series, so a revised quote is a new document, not an edit.

What it does not do: it sends no email or WhatsApp message itself. A person sends the link, by copying it or through the WhatsApp and email buttons, which open their own app. It does not yet calculate GST per line or print HSN codes on invoice lines. [Tell us you're interested](https://printfarmerp.com/#interest). It is not launched yet.

## Frequently asked questions

### What should a quote for a custom 3D printing job include?

A quote number and date, the description and the file revision it was priced from, quantity, material and colour, finish, the price and what it excludes (usually shipping), a validity date, the advance required, and a lead time that starts when the advance is received.

### How long should a 3D printing quote stay valid?

Indian law sets no period; the seller chooses. Small-business billing guides put it between 7 and 30 days, most often 15 to 30. For custom prints, 14 days is a reasonable default because filament prices and your printer schedule both move.

### What is the difference between a quotation and a proforma invoice?

A quotation is an offer: this is what we will make and for how much. A proforma is a request for payment before supply, usually sent once the customer has said yes. Neither is a tax invoice under GST, and neither creates a debt or a tax liability by itself.

### Do I need to show GST on a quotation in India?

The CGST Rules prescribe the contents of a tax invoice and of vouchers and notes, not of a quotation. If you are registered, stating the rate and whether it is extra or included avoids an argument later; if you are not registered, there is no GST to show.

### Should a 3D printing quote include shipping?

Include it if you know the destination pincode and the box size. If you do not, write the total as 'before shipping' and price the parcel once the address is known, before you ask for the balance.

### How do I stop customers disappearing after a quote?

You cannot stop it, but you can stop it costing you. Do not hold printer time until an advance arrives, send one follow-up before the validity date, and record the quote as a lost enquiry when it lapses.

## Sources

1. [CGST Rules, rule 46: Tax invoice (CBIC tax information portal)](https://taxinformation.cbic.gov.in/content/html/tax_repository/gst/rules/cgst_rules/active/chapter6/rule46_v1.00.html). Accessed 21 November 2026.
2. [CGST Act, section 31: Tax invoice (CBIC tax information portal)](https://taxinformation.cbic.gov.in/content/html/tax_repository/gst/acts/2017_CGST_act/active/chapter7/section31_v1.00.html). Accessed 21 November 2026.
3. [CGST Rules, rule 50: Receipt voucher (CBIC tax information portal)](https://taxinformation.cbic.gov.in/content/html/tax_repository/gst/rules/cgst_rules/active/chapter6/rule50_v1.00.html). Accessed 21 November 2026.
4. [Proforma invoice under GST: meaning, format and rules (BUSY)](https://busy.in/gst/proforma-invoice-under-gst-what-it-is-and-how-it-works/). Accessed 21 November 2026.
5. [How to write a business quotation (Tally Solutions)](https://tallysolutions.com/business-guides/how-to-write-quotation/). Accessed 21 November 2026.
6. [Quotation formats (Vyapar)](https://vyaparapp.in/quotation-formats). Accessed 21 November 2026.
7. [Quotation: glossary (Petpooja)](https://blog.petpooja.com/glossary/quotation/). Accessed 21 November 2026.
8. [Notification No. 66/2017-Central Tax, 15 November 2017: no tax on advances for goods (GST Council)](https://gstcouncil.gov.in/node/3993). Accessed 21 November 2026.
9. [Direct manufacturing service (IIT BHU Central Facility)](https://www.iitbhu.ac.in/cf/peh/direct_manufacturing). Accessed 21 November 2026.
10. [Manufacturing standards (Protolabs Network)](https://www.hubs.com/manufacturing-standards/). Accessed 21 November 2026.
11. [FDM 3D printing services (Fictiv)](https://www.fictiv.com/capabilities/3d-printing-services/fused-deposition-modeling). Accessed 21 November 2026.
12. [How to spot a transparent 3D printing quote (Stratasys Direct)](https://www.stratasys.com/en/stratasysdirect/resources/articles/choosing-the-right-3d-printing-partner/how-to-spot-a-transparent-3d-printing-quote/). Accessed 21 November 2026.
